AeroScout Exciter firmware notice

This just in from Aeroscout:

EX2000 Exciter Bulletin – Firmware Upgrade Required     
           
    

An EX2000 Exciter firmware upgrade is currently required to prevent compatibility issues of certain tags not responding to Exciter
s.

All customers who have EX2000 Excite
rs are required to upgrade the Exciter firmware to DSP223. In addition, if you have Cisco Context Aware Engine for Tags (CLE), you are required to upgrade the CLE to version 4.2.3.5 or above.

Please refer to article #2178 on http://support.aeroscout.com for complete details. You can also reply to this email or call us at U.S. +1-877-AERO-555 (or +1-650-292-4953), EMEA & APAC +49-302-5555-
094.

Determining the Exciter model can be done by one of the following met
hods:
a. The label on the back of the Exciter would say “EX2000” (not “EX2000B”)
b. Open AeroScout System Manager, right-click on the Exciter icon and select “Get Status” from the menu. For the EX2000, the HW version would be
“2”.

If you have any further questions, please do not hesitate to contact AeroScout Technical Support at: http://support.aeroscout.com, U.S. +1-877-AERO-555 (or +1-650-292-4953), EMEA & APAC +49-302-5555-094.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: